Home

Site Map

Catalog

EV Info

Prices

Contact

Small Electrical Components

Switching Relay			Small Gauge Terminal Block (With Cover) Charger Interlock Relay, Fuse Block
Charger Interlock Relay
Terminal Blocks
Fuse Blocks
Fusible Links

Switching Relay

A simple single-pole, single-throw relay for remote switching of components.

Features

• 1/4" spade connections
• Mounting tab

For dimensions, see table.

Charger Interlock Relay

A double-pole, double-throw relay to disable during charging, so that it can't be driven away still plugged in. When activated by AC input, this relay breaks the circuit between the ignition key and the potbox microswitch. Comes with 120VAC or 220VAC pull-down coil.

Features

• 1/4" spade connections
• Mounting tabs

For dimensions, see table.

Terminal Blocks

Terminal blocks are often handy when you have multiple connections feeding to a common power source or ground. We offer two types.

• Small Gauge

  This is suitable for your low current 16 ga. wiring.

  Features

  • Twelve 1/4" spade connections
  • Mounting tabs
  • Protective cover

  For dimensions, see table.

• Large Gauge

  This is a single stud suitable for connection to your 2/0 cable by a lug.

  Features

  • Threaded stud
  • Mounting tabs
  • Available in red or black

  For dimensions, see table.

Fuse Block

A fuse block serves the same purpose as a terminal block, with the added feature of fusing each connection.

Features

• Six1/4" spade connections
• Uses automotive spade fuses

For dimensions, see table.

Fusible Link A fusible link should be inserted in the traction battery circuit in each pack in the vehicle. This will blow and break the circuit in case of a short. Features Bolts to lugs or copper straps Delay curve eliminates nuisance blows Bakelite holder available Clear plex cover/shield available UL Approved For dimensions, see table.

Shown Installed In Copper Strap